W ofercie 6 produktów odpowiadających filtrowaniu
| Nazwa produktu | Sprzedawca | Opis |
|---|
Produkty z zagranicy
| Nazwa produktu | Sprzedawca | Opis | ||
|---|---|---|---|---|
| RS485 communication module for Logitron HTRF | Levtech Service & Production SRL | With this module it is possible to connect the Logitron HTRF pump on serial RS485 connection to the POS, using the Logitron protocol. It replaces the 3wire current loop module. | Więcej | |
| RS232 module for DOMS | Levtech Service & Production SRL | This communication module is made for the Gilbarco DOMS Veeder Root. Together they are communicating with fuel pumps or level indicators which are using serial RS232 communication. It is equivalent with DSB457 | Więcej | |
| Logitron Puma IFSF module | Levtech Service & Production SRL | This is an IFSF communication modul for the LOGITRON HTTE Puma fuel pump. | Więcej | |
| Communication module for Nuovo Pignone TSO | Levtech Service & Production SRL | This communication module is designed for Nuovo Pignone TSO main boards, it can be used with DART and standard Rs485 Nuovo Pignone protocol. | Więcej | |
| Zener Barrier ZbC2+ | COMET SYSTEM, s.r.o. | The Zener barrier ZbC2+ is a certified intrinsically safe interface. It is used to connect a certified intrinsically safe device located in a potentially explosive atmosphere (Hazardous area) to a non-certified device that is in a safe area. The Zener barrier prevents the transfer of unacceptably high energy from the safe area into the hazardous area. The ZbC2+ Zener barrier contains two identical diode return barriers in a common housing and it is designed for DIN rail mounting in a safe area. | Więcej | |
| IoT Wireless Four channel Datalogger with pulse and two-state inputs, with built-in 4G modem | COMET SYSTEM, s.r.o | TECHNICAL DATA MEASURED VALUE Two-state signal Pulses BINARY INPUT Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*); „H“ level input voltage:> 2 V; Minimum voltage applicable:0 V; Maximum voltage applicable:+30 V DC Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm; Contact resistance in the „switched-off“ state:> 300 kOhm; Contact voltage in the „switched-off“ state: ca 3 V; Minimum state duration necessary for latching the state:1s COUNTER INPUT Counter parameters Range 24 bits (16 777 215), the possibility of letting the counter overflow Maximum pulse frequency configured for voltage input - max. 5kHz configured for a voltage-free or open-collector transistor - max. 200Hz | Więcej |