9 products found
| Name of the product | Seller | Description |
|---|
Product from abroad
| Name of the product | Seller | Description | ||
|---|---|---|---|---|
| EthMBus-5 - Ethernet to M-Bus communication converter | Juraj Čaplický - Elektronika | Converter for SMART metering Remote communication with M-Bus meters using the Ethernet network in industry and building automation. The converter works as a transparent gateway for the transmission of M-Bus messages using TCP or UDP Ethernet protocols. Meter data processing. The converter works as a server in the Smart M-Bus mode. It communicates with the M-bus meters independently, processes their data and stores them in its own memory. The meter data is simultaneously available in form of: • table on a webpage • xml, xml(REST) and csv export • M-Bus protocol communication • e-mail with attached xml, csv exports | More | |
| BeeProg2 | Elnec s.r.o. | Extremely fast universal USB/LPT interfaced programmer. Programs 64-Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec. | More | |
| Interior sensors T+RH | Regmet s.r.o. | The sensors are intended for sensing and correcting room temperature and humidity. They are supplied in a version with RS485 communication via the ModBus RTU protocol (HTM1 type controllers) or in a version with analog outputs (0/10V and 4/20mA - HTV series sensors). They are produced in a wide range of designs by manufacturers of installation technology, e.g. ABB, GIRA, Schneider Electric, Legrand, BTicino, Merten, Jung, Efapel, etc. | More | |
| Industrial temperature and humidity sensors | Regmet s.r.o. | The sensors are intended for sensing T + RH in air ducts, exterior, or interior without increased design requirements. They come in a version with RS485 communication via the ModBus RTU protocol (PHM type sensors) or in a version with analog outputs (0/10V and 4/20mA - PHV series sensors). | More | |
| EthMBus-4M - Ethernet to M-Bus communication converter | Juraj Čaplický - Elektronika | Converter for SMART metering Remote communication with M-Bus meters using the Ethernet network in industry and building automation. The converter works as a transparent gateway for the transmission of M-Bus messages using TCP or UDP Ethernet protocols. Meter data processing. The converter works as a server in the Smart M-Bus mode. It communicates with the M-bus meters independently, processes their data and stores them in its own memory. The meter data is simultaneously available in form of: • table on a webpage • xml, xml(REST) and csv export • M-Bus protocol communication • e-mail with attached xml, csv exports | More | |
| RS232toMBus-5 - RS232 to M-Bus communication converter | Juraj Čaplický - Elektronika | Remote data retrieval from M-Bus devices via the RS232 serial communication line in industry and building automation. The most frequently used M-Bus slave devices are heat, water and electricity consumption meters. | More | |
| RS232toMBus-4M - Ethernet to M-Bus communication converter | Juraj Čaplický - Elektronika | Remote data retrieval from M-Bus devices via the RS232 serial communication line in industry and building automation. The most frequently used M-Bus slave devices are heat, water and electricity consumption meters. | More | |
| RS232toMBus-4SL - RS232 to M-Bus communication converter | Juraj Čaplický - Elektronika | Remote data retrieval from M-Bus devices via the RS232 serial communication line in building automation. From the point of view of robustness the converter cannot be utilized in industrial environments. The most frequently used M-Bus slave devices are heat, water and electricity consumption meters. | More | |
| RS485toMBus-5 - RS485 to M-Bus communication converter | Juraj Čaplický - Elektronika | Remote data retrieval from M-Bus devices via the RS485 serial communication line in industry and building automation. The most frequently used M-Bus slave devices are heat, water and electricity consumption meters. | More |