În ofertă filtrul a găsit 9 produse convenabile
| Denumirea produsului | Vînzător | Descriere |
|---|
Produse din străinătate
| Denumirea produsului | Vînzător | Descriere | ||
|---|---|---|---|---|
| BeeProg2 | Elnec s.r.o. | Extremely fast universal USB/LPT interfaced programmer. Programs 64-Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec. | Mai mult | |
| Interior sensors T+RH | Regmet s.r.o. | The sensors are intended for sensing and correcting room temperature and humidity. They are supplied in a version with RS485 communication via the ModBus RTU protocol (HTM1 type controllers) or in a version with analog outputs (0/10V and 4/20mA - HTV series sensors). They are produced in a wide range of designs by manufacturers of installation technology, e.g. ABB, GIRA, Schneider Electric, Legrand, BTicino, Merten, Jung, Efapel, etc. | Mai mult | |
| Industrial temperature and humidity sensors | Regmet s.r.o. | The sensors are intended for sensing T + RH in air ducts, exterior, or interior without increased design requirements. They come in a version with RS485 communication via the ModBus RTU protocol (PHM type sensors) or in a version with analog outputs (0/10V and 4/20mA - PHV series sensors). | Mai mult | |
| BeeProg3 | Elnec s.r.o. | Ultra speed universal 64-pindrive programmer, design focused on high-capacity memories programming. | Mai mult | |
| The digital-to-analog expansion module PCU6 | STERKRAK | PCU6 module is used in automation systems to expand the number of digital inputs of PLC controllers. By connecting the device to an analog input of the controller, we get the ability to read and monitor 6 digital inputs. By using precision electronic components, the output voltage of the module is stable in time, temperature and precisely maps the input states. LEDs indicate the status of digital inputs. In our product offer can be found extension modules for PLCs with voltage, current and resistance (temperature) inputs. | Mai mult | |
| DALI2net | Foxtron s.r.o. | Converter two DALI buses / Ethernet DALI2net has two areas of usage: Control and monitoring DALI bus by superior systemAdjusting of device on DALI bus Control and monitoring DALI bus by superior system Control device may send messages of various length on DALI bus. Except standard messages may be also send messages eDALI, NEMA DALI, DIGIDIM DALI (Helvar) and other optional by user. DALInet supports Multimaster communication (multiple devices which actively send data on DALI bus). Superior system may sends the data anytime because message collision is handled by convertor. DALInet sends to superior system all communication ongoing on DALI bus. Superior system is also informed about other events on DALI bus (data collision, shortcut of the bus or connection of mains voltage). Setup of device on DALI bus Setup of device on DALI bus can be done with DALIconfig program which is downloadable below for free. Not only all DALI devices from Foxtron company can be set by this program - DALI4sw, DALIrel, DALIpwm, DALIpwm15, but also devices from other producers. | Mai mult | |
| DALImiw | Foxtron s.r.o. | DALImiw30 - Microwave combined DALI sensor DALImiw30 is combined sensor operating on DALI bus. It can regulate to ambient light control according to the motion in the sensed area. Range of sensor is adjustable by positioning head (up to 30 meters). It is possible to control the sensor using standard DALI messages. | Mai mult | |
| DALIpir20 | Foxtron s.r.o. | DALI high bay sensor - movement and lighting. Up to 15m. | Mai mult | |
| KNXnet | Foxtron s.r.o. | Converter KNX / ethernet Power supply passive PoE or 9-32V Indication of communication on KNX bus Galvanic isolation KNX/ETH Din rail mount KNXnet is a converter between KNX bus and Ethernet (TCP/IP). Communication on the TCP/IP side is done via simlpe ASCII protocol which is described in the User manual. | Mai mult |