COMET SYSTEM, s.r.o
IoT Wireless Four channel Datalogger with pulse and two-state inputs, with built-in 4G modem
TECHNICAL DATA
MEASURED VALUE
Two-state signal
Pulses
BINARY INPUT
Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*);
„H“ level input voltage:> 2 V;
Minimum voltage applicable:0 V;
Maximum voltage applicable:+30 V DC
Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm;
Contact resistance in the „switched-off“ state:> 300 kOhm;
Contact voltage in the „switched-off“ state: ca 3 V;
Minimum state duration necessary for latching the state:1s
COUNTER INPUT
Counter parameters Range 24 bits (16 777 215), the possibility of letting the counter overflow
Maximum pulse frequency configured for voltage input - max. 5kHz
configured for a voltage-free or open-collector transistor - max. 200Hz
COMET SYSTEM, s.r.o
Temperature data logger for 3x thermocouples, 1x external Pt1000 probe and 1x internal sensor
TECHNICAL DATA
MEASURED VALUE
Temperature
TEMPERATURE SENSOR - INTERNAL PROBE
Measuring range -30 to +70 °C
Accuracy ±0.4°C;
Resolution 0.1 °C
Response time of temperature measurement (temperature step 20°C, air flow approximately 1m/s) t63 < 6 minutes; t90 < 15 minutes
TEMPERATURE SENSOR - EXTERNAL PROBE PT1000
Measuring range -200 to +260 °C
Accuracy ±0.2°C; ±0,2 % of the measurement value in a range of +100 to +260 °C
Resolution 0.1 °C
Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe
TEMPERATURE SENSOR - THERMOCOUPLE TYPE B, J, K, N, S, T
Measuring range according to the connected thermocouple
Accuracy ±0,4°C
Resolution 0,1 °C
Response time according to the connected thermocouple
Universal Scientific Technologies s.r.o.
AIRDOS04 - Airborne cosmic radiation dosimeter
AIRDOS is an airborne cosmic radiation dosimeter and spectrometer unit. It is intended for long-term measurement of cosmic radiation and dosimetry in mixed ionizing radiation fields on board aircraft.
The instrument is designed primarily for the dosimetry of cabin crew and flight attendants of commercial flights. Thanks to its design of detachable data storage and power source from accumulators, the required maintenance time is minimal. The calibrated AIRDOS04 detector can be placed on-board continuously and it is only necessary to replace the accumulator/storage module.
Produkty z zagranicy
![Temperature and Relative Humidity Sensor [SN-TH-02]](https://www.ecubeportal.com/images/application-list-small/54/0/image_5ec673c3a7bcd)
![Industrial Temperature and Relative Humidity Sensor [SI-TH-02]](https://www.ecubeportal.com/images/application-list-small/54/1/image_5ecbc3b6cec29)
![Industrial Temperature Sensor [SI-T-02]](https://www.ecubeportal.com/images/application-list-small/54/2/image_5ec69987a3605)
